Waterproof Solder Seal Heat Shrink Butt Connectors Lug Terminals Electrical Wire Conector Car Insulated Terminal
Payment Methods:
Description
If you want more item, please contact us,we will add the quantity and give you the cheaper price
Size Selection
Cross-section
26-24 AWG Wire : 0.25-0.34mm²
22-18 AWG Wire : 0.5-1.0mm²
16-14 AWG Wire : 1.5-2.5mm²
12-10 AWG Wire : 4.0-6.0mm²
10-6 AWG Wire : 6.0-14.0mm²
8-4 AWG Wire : 8.0-22.0mm²
26-24 AWG ( 0.25-0.34mm²）
22-18 AWG(0.5-1.0mm²)
16-14 AWG (1.5-2.5mm²)
12-10 AWG (4.0-6.0mm²)
10-6 AWG (6.0-14.0mm²)
8-4 AWG (8.0-22.0mm²)
Specification
Specification:
Insulation: PE
Plating:Tin
Terminal Body: copper
Operating temperature range: :-55℃ – 125℃
Minimum shrink temperature: 80°C
Minimum temperature for solder to melt: 138°C
Complete melting temperature for solder: ＞160℃
Dielectric strength: 1kv
Protection Degree: IP67
Product Advantage
High Quality – Comply with all relevant European standards; Shrinking ratio: 2:1.
Easy Operation – Transparent sleeve provides precise inspection when strip and insert wires inside.
More Effective Way – An easy one step connection of wires, insulated and sealed.
No Slip Wire Contact – Tubing reduces in size and solder will melt and flow through the stripped wires, ensure strong holding — your wire will never slip out of the connector. Can be ideal used in marine and automobile applications.
Application Method
1.Strip the wire
2.Insert wire into terminal
3.Tighten the wire and move it to the center (Don’t exceed the color mark range ）
4. Heat shrink by hot air gun
Professional Robotics and Electronic Design Services
STEAM education DIY KIT Qhebot
Disclaimer: Terms of Information Use
Last Updated: 01-01-2026Welcome to lkl-sunrise.com (“the Site”). We are dedicated to supporting engineers, students, hobbyists, and makers through technical resources, tutorials, and educational materials.
Please read this disclaimer carefully. By using the Site, you acknowledge and agree to the following terms:
1. Informational & Educational Use Only
All content—such as product specs, diagrams, tutorials, and code samples—is provided for informational and educational purposes only. It is intended as a general guide, not as a definitive or professional solution.
2. No Guarantee of Accuracy
We strive to keep information current and correct, but no guarantees are made regarding completeness, accuracy, or reliability.
- Technical Data: Component specs may change without notice. Always confirm with the official documentation.
- Tutorials: Outcomes may vary depending on tools, components, and user experience.
3. Assumption of Risk
Working with electronics involves inherent risks. By using the Site, you assume full responsibility for:
- Injuries (e.g., shock, burns)
- Fire hazards
- Damage to property or equipment
- Data loss
Always follow safety protocols and use proper safety equipment.
4. No Professional Advice
Content on the Site is not professional engineering or legal advice. If you're working on commercial, life-critical, or regulated applications, consult a licensed expert.
5. Software & Code
Any code, libraries, or software are provided “as-is”, without warranties. They are intended for educational/demo purposes and may not be production-ready.
6. Third-Party Links
We may link to third-party websites for reference. These links are provided for convenience only. We are not responsible for their content, security, or accuracy. Use them at your own risk.
7. Intellectual property
All original content (text, images, videos, etc.) is protected by copyright and may not be copied or redistributed without permission.
8. Updates
We may update this disclaimer at any time without notice. Please check this page regularly for changes.
If you do not agree with these terms, please discontinue use of the Site.
For questions, please contact us.