11key LED strip controller Mini Dimmer RF Remote 5-24v For 5630 2835 5050 Single Color LED strip 1-10PCS
8152 in stock
8152 in stock
Payment Methods:
Description
11key LED strip controller Mini Dimmer RF Remote 5-24v For 5630 2835 5050 Single Color LED strip
Note:
1.We Offer DC/ Wire Connector + 11key Controller for choise
2.Battery is not included because of the security reason and custom problem during transport,
3.Battery model is CR2025,Please buy it yourself in your local market.
Instructions for RF Wireless Remote
1.Turn On/ Standby
Press this key to turn on unit or switch to standby mode. Unit will turn on and restore to previous status at powering on moment.
2. Lighting mode
Switch to lighting mode from dynamic mode.
3/8/9. Dimmer Adjust Shortcuts
Switch to 100%, 50%, or 25% brightness lighting mode.
4/6. Dynamic Mode Adjust
Switch to dynamic mode from lighting mode, or switch between different dynamic modes.
5/7. Speed Adjust
Adjust playing speed of dynamic modes. Press SPEED+ to increase seed and press SPEED- to decrease.
10/11. Brightness Adjust (Dimmer)
Adjust lighting mode brightness. Press BRIGHT+ to increase brightness and press BRIGHT- to decrease
Functions for RF Wireless Remote
Dimmer & Dynamic
8 Dynamic Effects
10-level Dimmer
256-Grade PWM
Speed Adjustable
Card Type Remote
Ultra Slim Design
Smooth Dimmer Effect
1 to 1 Remote Paired
Auto Save Function
Installing for RF Wireless Remote
1. Power Supply
This unit accepts DC 5V to 24V power supply. The red cable should be connected to positive and black cable to negative.
Please select proper power supply according to the LED application.
2. LED Output
The red cable should be connected to LED positive and black cable to negative. The peak output current is 12A, please reduce load if main unit is overheating.
CAUTION:Do not short circuit the LED output, this may lead to permanent damage!
3. Remote Control
Please pull out the insulate part before using. The RF wireless remote signal can pass through barrier, so it’s not necessary to aim at the main unit when operate. For proper receiving remote signal, do not install the main unit in closed metal parts. The remote battery is 3V CR2025 type, please only replace with same type battery.
Specification
Dynamic mode: 8 modes
Dynamic speed level: 10 levels
Lighting brightness level : 10 levels
PWM grade: 256 grades
Smooth dimmer effect: Yes
Working voltage: DC 5~24V
Output current : peak 12A
Remote control mode: RF Wireless
Remote frequency: 433.92MHz
Remote distance : >15m at open area
Package includes:
1 x Mini In-line LED Light Controller/Dimmer
1 x RF Wireless Remote Controller R106
Professional Robotics and Electronic Design Services
STEAM education DIY KIT Qhebot
Disclaimer: Terms of Information Use
Last Updated: 01-01-2026Welcome to lkl-sunrise.com (“the Site”). We are dedicated to supporting engineers, students, hobbyists, and makers through technical resources, tutorials, and educational materials.
Please read this disclaimer carefully. By using the Site, you acknowledge and agree to the following terms:
1. Informational & Educational Use Only
All content—such as product specs, diagrams, tutorials, and code samples—is provided for informational and educational purposes only. It is intended as a general guide, not as a definitive or professional solution.
2. No Guarantee of Accuracy
We strive to keep information current and correct, but no guarantees are made regarding completeness, accuracy, or reliability.
- Technical Data: Component specs may change without notice. Always confirm with the official documentation.
- Tutorials: Outcomes may vary depending on tools, components, and user experience.
3. Assumption of Risk
Working with electronics involves inherent risks. By using the Site, you assume full responsibility for:
- Injuries (e.g., shock, burns)
- Fire hazards
- Damage to property or equipment
- Data loss
Always follow safety protocols and use proper safety equipment.
4. No Professional Advice
Content on the Site is not professional engineering or legal advice. If you're working on commercial, life-critical, or regulated applications, consult a licensed expert.
5. Software & Code
Any code, libraries, or software are provided “as-is”, without warranties. They are intended for educational/demo purposes and may not be production-ready.
6. Third-Party Links
We may link to third-party websites for reference. These links are provided for convenience only. We are not responsible for their content, security, or accuracy. Use them at your own risk.
7. Intellectual property
All original content (text, images, videos, etc.) is protected by copyright and may not be copied or redistributed without permission.
8. Updates
We may update this disclaimer at any time without notice. Please check this page regularly for changes.
If you do not agree with these terms, please discontinue use of the Site.
For questions, please contact us.